BoosterPlug er en Plug-And-Play-løsning som gir din motorsykkel en fetere blanding! Perfekt for de som ønsker en bedre kjøreopplevelse eller har ettermonterte sportspotter!

BoosterPlug

BoosterPluggen er en Plug-And-Play løsning som gir din motorsykkel en fetere blanding!

Perfekt til deg som ønsker en bedre kjøreopplevelse eller har ettermontert sportspotte!

De aller fleste motorsykler med injeksjonsmotorer kjører fra fabrikk med en mager blanding, det vil si lite drivstoff kontra luft (AFR = Air/Fuel Ratio). Det er nødvendig å overholde de strenge miljø- og forurensningskravene, samtidig som man opprettholder en sunn drivstofføkonomi.

Denne magre blandingen kan forårsake problemer med tanke på motorsykkelens motorturtall, gassrespons og virke rastløs. Den kjøres ofte så mager at den blir unødvendig varm. Du ser ofte dårlig motor som går på lavere turtall, dårlig gassrespons og tilbakeslag på sykler med ettermontert sportspott. En BoosterPlug løser alle disse problemene!

BoosterPlug er en danskutviklet løsning som gir en fetere blanding ved å samarbeide med motorsykkelens ECU og O2 sensor. Det fungerer der du trenger det. Nemlig ved lave til middels høye turtall (Closed Loop Mapping) Der du normalt befinner deg og trenger stillegående motorgang, god gassrespons og komfort, mens ved høye turtall (Open Loop Mapping).

ECU-en virker på O2-sensoravlesningen. BoosterPlug er et Plug-and-Play-system som sitter mellom ECU og temperatursensoren i luftfilterboksen. Nettopp, det får ECU til å tro at den atmosfæriske luften er kaldere enn den faktisk er (høyere oksygentetthet). Dette gjør at ECU automatisk gir mer og dermed oppnås en fetere blanding, uten overmating av motoren.

I motsetning til f.eks. Power-Commander er BoosterPlug som er utrolig enkel å installere og vil være den beste løsningen i de aller fleste tilfeller. Power Commander er bra for hardcore-syklistene som har mye tid til å stå på banen, men for den vanlige motorsyklisten som bare vil ha litt mer ut av motorsykkelen eller rett og slett har installert en mer åpen pott - Da er BoosterPlug en langt bedre løsning.

Det finnes mange produkter som BoosterPlug, men de lider alle av det samme problemet: De øker ikke drivstofftilførselen med riktig mengde over hele temperaturspekteret. Med BoosterPlug oppnår du en økt drivstofftilførsel på rundt 6% ved både -30°, 5° og 40° Celsius, mens de andre produktene kun øker med 6% ved 20° Celsius, 12% ved 40° og 1% ved -30°, det vil si at mengden bensin som tilføres svinger med de andre løsningene, mens BoosterPluggens tilførsel er konstant.

Dette oppnås ved hjelp av Boosterpluggens egen temperatursensor, som gjør det mulig å justere etter atmosfærisk temperatur og ikke bare basert på en fast kurve/kartlegging. BoosterPlug er tilgjengelig for nesten alle motorsykler med innsprøytning og er laget for å passe pluggene på de mange modellene (Husk: Bildet er kun veiledende), velg din APRILIA modell i rullegardinmenyen helt øverst. MC-Land anbefaler – 

En liten investering som gir et fantastisk resultat.

BoosterPlug til APRILIA
APRILIA FUEL INJECTION OPTIMIZATION TUNING - PLUG AND PLAY
The BoosterPlug for your Aprilia provides an easy and efficient way to optimize the fuel injection on your bike. The lean air/fuel mixture on the stock bike makes it less than perfect to ride, and nobody want a motorcycle to be difficult to control in city traffic or in tricky corners and bends. The BoosterPlug fuel enrichment is an inexpensive and proven way to release the full potential in your Aprilia.We have build the BoosterPlug to military specs to ensure that it will endure the rough environment on a motorcycle, and it goes without saying that the BoosterPlug comes with a lifetime warranty. Tuning your fuel injection have never been easier.
BoosterPlug til BMW
BMW MOTORCYCLE - FUEL INJECTION OPTIMIZATION 
The BoosterPlug for your BMW Motorcycle is an efficient and cost effective tuning method that will improve the fuel injection on you bike, and our device is a well accepted cure to the common problems like stalling, rough and weak idle, and surging on constant low speeds.Installation is easy and fast as the BoosterPlug is plugged into the original connectors on the bike, and the BoosterPlug is already set up for your bike, so there is no extensive adjustment procedure to go through.We made the process of fuel injection tuning easy, and the BoosterPlug comes with a lifetime warranty.
BoosterPlug til DUCATI
SIMPLE TUNING SOLUTION FOR YOUR DUCATI - A PROVEN UPGRADE
You probably already know that the stock Ducati is running less than perfect because the fuel injection is trimmed too far to the lean side. We build the BoosterPlug fuel injection tuning module to provide your engine with the small controlled fuel enrichment that is necessary to eliminate the common lean running issues like weak idle, stalling issues, poor low speed running, and the hard and unpleasant throttle action that makes the bike difficult to control in tight situations.The BoosterPlug have proven itself over and over as a simple and efficiant plug and play tuning device and is accepted as a great performance upgrade on Ducati Motorcycles.
BoosterPlug til CCM
CCM Tuning
The high spec CCM GP450 is suffering from the same lean running issues as all other modern fuel injected bikes.The result is a weak idle and low speed running, and a hard and snatchy throttle that feels mostly like an on/off switch - Not exactly ideal when you are negotiating a difficult section on the track.With the BoosterPlug tuning you get the small, controlled fuel enrichment your CCM needs to run like it should have from the factory - all in a small package that easy to install with the original connectors (No wire cutting and splicing).Fuel injection tuning have never been easier - the BoosterPlug is the first choice in aftermarket parts.
BoosterPlug til DERBI
Simple tuning for your Derbi bike.
The fine and rare Derbi Mulhacén suffers from the same (too) lean air fuel mixture as all other modern fuel injected motorcycles.With the BoosterPlug fuel injection tuning you get the small, controlled fuel enrichment your Derbi needs to run like it should have from the factory - all in a small package that easy to install with the original connectors (No wire cutting and splicing).
BoosterPlug til Husqvarna
HUSQVARNA MOTORCYCLE TUNING WITH THE BOOSTERPLUG
You would expect your high quality Husqvarna motorcycle to run perfect from the factory, but reality is unfortunately a bit different. The air/fuel ratio provided by the fuel injection system is on the lean side, and the result is a bike that is less than perfect to ride. Poor idle and low speed running and an "on/off like" throttle action are the typical lean mixture issues on the standard bike. The BoosterPlug is designed to provide the slightly richer air/fuel ratio that the engine needs to give you full control of the bike and a much nicer ride.
The perfect Power Commander Alternative 
BoosterPlug til KTM
KTM FUEL INJECTION TUNING MADE SIMPLE
The BoosterPlug tuning module is offering a simple and proven way to upgrade the fuel injection system on your KTM. We have build the BoosterPlug to make the tuning solution as easy as possible for you. No cutting or splicing of wires, no complicated setup procedures, no irreversible changes to the bike. The BoosterPlug comes with the original connectors, so the installation is a matter of clicking the connectors together -  and you can then go out and enjoy the improvements.The motorcycle is a rough environment, and life is too short for flimsy electronics. So we have build the BoosterPlug to military specs, and our lifetime warranty shows that we are confident that the BoosterPlug will outlast your bike without problems.
BoosterPlug til MOTO GUZZI
MOTO GUZZI TUNING - THE BOOSTERPLUG WAY
The BoosterPlug is offering a simple and efficent way to improve the fuel injection on your Moto Guzzi. Our tuning device is working in cooperation with the fuel injection ECU to make the air/fuel mixture slightly richer - and this is the only way to eliminate the common fuel injection problems with the snatchy throttle and poor idle and low speed behaveior. The BoosterPlug tuning will make your Moto Guzzi what it should have been from the factory, and our device is by far the simplest and cheapest way to release the full potential in your bike.
"The BoosterPlug is a brilliant Power Commander alternative"   
BoosterPlug til MV Agusta
ESSENTIAL FUEL INJECTION TUNING FOR YOUR MV AGUSTA
The beautiful and well engineered MV Agusta's are unfortunately let down by the very lean air/fuel mixture on the stock bike, and the engine is suffering from the common lean running problems.The result is a horribly snatchy and on/off like throttle action, and a weak idle and poor low speed running. Did you notice how easy it is to stall the engine on take off ?The BoosterPlug is designed to offer the MV Agusta engine a slightly richer mixture in the areas where it is needed the most, and our compact tuning module is known world wide to be the best and most simple tuning solution to the common problem that prevents the engine from releasing it's full potential.
"The BoosterPlug is a brilliant Power Commander alternative"   
BoosterPlug til Royal Enfield
OPTIMIZING YOUR ROYAL ENFIELD FUEL INJECTION - BEST PLUG AND PLAY TUNING
Your fuel injected Royal Enfield is running a lot leaner than desired from the factory, and the result is a bike that is less than perfect to ride and an engine that is running too hot.The only way to restore low speed performance and rideability is to provide a slightly richer air/fuel ratio, and the BoosterPlug tuning module provides the best solution in the market.The air cooled Royal Enfield engine is having a hard time when forced to run very lean, because the lean mixture will increase the combusiton temperature and lower the performance. The fuel injected engine will have a much easier life with the slightly richer mixture, and especially the thermally stressed exhaust valves will love you for the BoosterPlug tuning module. The BoosterPlug should be your first choice when upgrading your bike with aftermarket parts.
"The BoosterPlug is a brilliant Power Commander alternative"  
BoosterPlug til TRIUMPH
THE EASY AND BEST FUEL INJECTION UPGRADE FOR YOUR TRIUMPH
You would expect a prime product like your Triumph motorcycle to perform the best it can from the factory. Unfortunately, the stock bike is limited by the very lean air/gasoline mixture that is a result of the factory setup. The lean mixture tuning of the fuel injection is causing a few problems that is making the bike less than perfect to ride and enjoy: Low speed running is uneven, idle is poor and the engine has a tendency to stall on take off, and the throttle is very on/off like which makes it difficult to ride the bike smoothly around corners. We have designed the BoosterPlug fuel injection tuning module to provide the small controlled fuel enrichment your engine needs to maximize your riding experience, and our product have proven itself with thousands of happy owners world wide.
"The BoosterPlug is a brilliant Power Commander alternative"  
BoosterPlug til HONDA
AN EASY AND EFFICIENT UPGRADE OF THE FUEL INJECTION ON YOUR HONDA MOTORCYCLE
Your fuel injected Honda is running a bit lean from the factory and if you want your motorcycle to perform as good as possible, you need the BoosterPlug that will provide the small controlled fuel enrichment that your engine desperately needs.The lean mixture on the standard bike will make the idle weak and the engine will have a tendency to stall on take off, low speed running will be lumpy, and throttle action is hard and on/off like. The only way to eliminate these problems is to make the air/fuel ratio slightly richer, and this is what the BoosterPlug offers in a simple and efficient fuel injection tuning product.