BoosterPlug til KTM
zoom_out_map
chevron_left chevron_right

BoosterPlug til KTM

KTM FUEL INJECTION TUNING MADE SIMPLE

The BoosterPlug tuning module is offering a simple and proven way to upgrade the fuel injection system on your KTM. We have build the BoosterPlug to make the tuning solution as easy as possible for you. No cutting or splicing of wires, no complicated setup procedures, no irreversible changes to the bike. The BoosterPlug comes with the original connectors, so the installation is a matter of clicking the connectors together -  and you can then go out and enjoy the improvements.
The motorcycle is a rough environment, and life is too short for flimsy electronics. So we have build the BoosterPlug to military specs, and our lifetime warranty shows that we are confident that the BoosterPlug will outlast your bike without problems.

  • EXC-F (250,350,450,500) (-2020)
  • Freeride 250 F (2018 - up)
  • Freeride 350 (2012 - up)
  • Duke 125 (2011-2016)
  • Duke 125 (2017-2020)
  • Duke 200 (-2019)
  • Duke 250 (2015-2016)
  • Duke 250 (2017-2020)
  • Duke 390 (2013-2016)
  • Duke 390 (2017-2020)
  • Adventure 390 (All) (2020)
  • RC 125/200/250/390 (-2020)
  • 690 Duke (All) (-2020)
  • 690 Supermoto + R
  • 690 Enduro + R (-2020)
  • 690 SMC + R (-2020)
  • 790 Duke (-2020)
  • 890 Duke R (2020)
  • 790 Adventure (-2020)
  • 990 Adventure + R
  • 990 Super Duke + R
  • 990 Supermoto + R
  • 990 SMT
  • 1190 RC8 + R
  • 1050/1090 Adventure
  • 1190 Adventure
  • 1290 Super Adventure (-2020)
  • 1290 Super Duke (R+GT) (-2020)

kr 1,839.00 Inklusive MVA

kr 1,471.20 Eksklusive MVA

ad3.jpg

local_shipping Vi sender med

Fraktpris fra kr. 99.-

NB! Hvis du ikke er helt sikker på om du har valgt riktig produkt, så er det lurt å gi beskjed om dette i meldingsfeltet på ordren.

Skriv inn hvilket kjøretøy du skal ha produktet til. Vi kan da sjekke om du har valgt riktig uten å måtte kontakte deg.

Husk å bruke folkeregistrert adresse.

KTM FUEL INJECTION TUNING MADE SIMPLE

The BoosterPlug tuning module is offering a simple and proven way to upgrade the fuel injection system on your KTM. We have build the BoosterPlug to make the tuning solution as easy as possible for you. No cutting or splicing of wires, no complicated setup procedures, no irreversible changes to the bike. The BoosterPlug comes with the original connectors, so the installation is a matter of clicking the connectors together -  and you can then go out and enjoy the improvements.
The motorcycle is a rough environment, and life is too short for flimsy electronics. So we have build the BoosterPlug to military specs, and our lifetime warranty shows that we are confident that the BoosterPlug will outlast your bike without problems.

The smart way to fix the weak idle and snatchy throttle problems 

All modern fuel injected bikes are troubled by the common idle problems, low speed issues and horrible throttle action. These problems are caused by the very lean mixture on the stock bike, and the BoosterPlug fuel enrichment is a tried and tested tuning solution with thousands of happy owners world wide. By using the very good (but slightly lean) factory fuel map as a baseline, we are able to offer a brilliant and simple fuel injection tuning solution without the need for expensive, frustrating, and time consuming programming sessions. We have done the work for you to sort out the hard throttle action and the common idle problems- now go out and have fun.

Download installation instructions:

BP-KTM
BP-KTM

Installation

Installation BoosterPlug

Last ned (357.24KB)