Speedohealer SH-V4-2WA special model
These modules have the exact same features as the standard SH-V4 module but work with different speed sensor type. Our Product
Advisor shows the exact part numbers you need for your bike.
Those motorcycles for which we list the SH-V4-C or SH-V4-2WA modules,
can not use the SH-V4, SH-V4-TSD or SH-V4-AB modules.
SH-V4-2WA + SH-H20
HONDA CB1100 [non-ABS] (2014-2018), VFR800 Interceptor [non-ABS] (2014-2020), XL700V Transalp [non-ABS] (2008-2014)
SH-V4-2WA + SH-H21
HONDA CRF450L (2018-2024)
local_shipping Vi sender med
Fraktpris fra kr. 99.-
NB! Hvis du ikke er helt sikker på om du har valgt riktig produkt, så er det lurt å gi beskjed om dette i meldingsfeltet på ordren.
Skriv inn hvilket kjøretøy du skal ha produktet til. Vi kan da sjekke om du har valgt riktig uten å måtte kontakte deg.
Husk å bruke folkeregistrert adresse.
About the SpeedoHealer
Features
Easy to use User Interface
Easy to program, review and update the stored parameters.
Extended calibration range
-99.9% to +9999.9% in steps of 0.1% Which means the signal can be adjusted from 1/1000 to x100, in increments of 0.001. This range is efficient even for the most radical gearing changes and suitable for all kind of custom applications as well.
Improved top speed
Can be used to remove the top speed limiter of the speed restricted motorcycles and ATVs e.g. from Honda, Kawasaki, Yamaha, Can-Am.
Detachable remote button
The SpeedoHealer comes with a detachable remote button as standard for the Top Speed Recall feature.
Supreme compatibility
Compatible with most motorcycles, ATVs/UTVs. Plug ‘n Go harness kits are available for most models. Compatible with all our products too.
Dual-bank memory
Store two independent calibration values and switch between them by the press of a button. There is a clear, visual confirmation of the active bank and value in use. Useful for road & track setting when changing gearing or running different sized wheels/tires.
Display unit conversion
Change from Km/h to MPH and vice versa by the press of a button.
Interactive test mode
Confirm installation before take off.
Compact dimensions
30% smaller and lighter unit compared to SHv3. Full SMD design. The smallest and lightest full featured calibrator ever built.
Wide operating voltage range
Works from as low as 3V supply voltage up to 19V. Means even easier installation for all Yamaha bikes and some other models. Reduced power consumption and auto stand-by.
High-speed CPU
32-bit processing ensures high accuracy and immediate response to the input signal with no lag.
Robust design
100% weatherproof. Every unit is fully tested, guaranteed to work. All leads are protected against reverse voltage, short circuits and high energy transients.
