Speedohealer SH-V4-C - Kawasaki Specials
chevron_left chevron_right

Speedohealer SH-V4-C - Kawasaki Specials

These modules have the exact same features as the standard SH-V4 module but work with different speed sensor type. Our Product

Advisor shows the exact part numbers you need for your bike.

Those motorcycles for which we list the SH-V4-C or SH-V4-2WA modules,

can not use the SH-V4, SH-V4-TSD or SH-V4-AB modules.

SH-V4-C + SH-U01

KAWASAKI Ninja 125 (2019-2021), Ninja 400 [ABS] (2018-2023), Ninja 650 [non-ABS] (2017-2024), Ninja 650 [ABS] (2017-2024), Ninja 1000 [non-ABS] (2014-2024), Ninja 1000 [ABS] (2014-2024), Ninja 1000SX (2020-2024), Versys 650 / KLE 650 [A/B/C/D/E/F non-ABS] (2018-2024), Versys 650 / KLE 650 [G non-ABS] (2019-2024), Versys 650 / KLE 650 [A/B/C/D/E/F ABS] (2018-2024), Versys 650 / KLE 650 [G ABS] (2019-2024), Versys 1000 (2012-2024), Vulcan S 650 (2017-2024), Z125 (2019-2022), Z900 (2017-2024), Z900RS (2018-2024), Z1000 [ABS] (2014-2020), Z1000SX [non-ABS] (2014-2021), Z1000SX [ABS] (2014-2021), Z H2 (2020-2024) 

  • SH-U01

kr 1,119.20 Eksklusive MVA

kr 1,119.20 Eksklusive MVA


local_shipping Vi sender med

Fraktpris fra kr. 99.-

NB! Hvis du ikke er helt sikker på om du har valgt riktig produkt, så er det lurt å gi beskjed om dette i meldingsfeltet på ordren.

Skriv inn hvilket kjøretøy du skal ha produktet til. Vi kan da sjekke om du har valgt riktig uten å måtte kontakte deg.

Husk å bruke folkeregistrert adresse.

About the SpeedoHealer


Easy to use User Interface

Easy to program, review and update the stored parameters.

 Extended calibration range

-99.9% to +9999.9% in steps of 0.1% Which means the signal can be adjusted from 1/1000 to x100, in increments of 0.001. This range is efficient even for the most radical gearing changes and suitable for all kind of custom applications as well.

 Improved top speed

Can be used to remove the top speed limiter of the speed restricted motorcycles and ATVs e.g. from Honda, Kawasaki, Yamaha, Can-Am.

 Detachable remote button

The SpeedoHealer comes with a detachable remote button as standard for the Top Speed Recall feature.

 Supreme compatibility

Compatible with most motorcycles, ATVs/UTVs. Plug ‘n Go harness kits are available for most models. Compatible with all our products too.

 Dual-bank memory

Store two independent calibration values and switch between them by the press of a button. There is a clear, visual confirmation of the active bank and value in use. Useful for road & track setting when changing gearing or running different sized wheels/tires.

 Display unit conversion

Change from Km/h to MPH and vice versa by the press of a button.

 Interactive test mode

Confirm installation before take off.

 Compact dimensions

30% smaller and lighter unit compared to SHv3. Full SMD design. The smallest and lightest full featured calibrator ever built.

 Wide operating voltage range

Works from as low as 3V supply voltage up to 19V. Means even easier installation for all Yamaha bikes and some other models. Reduced power consumption and auto stand-by.

 High-speed CPU

32-bit processing ensures high accuracy and immediate response to the input signal with no lag.

 Robust design

100% weatherproof. Every unit is fully tested, guaranteed to work. All leads are protected against reverse voltage, short circuits and high energy transients.

SH-V4-C + SH-U01
Du liker kanskje også