BATTERY CHARGERS AND POWERBANKS

Light and compact multifunctional mini starter
Allows restart of motorcycles and scooters when the battery is low
Charge your electronic devices using it as a Power Bank
Has built-in LED flashlight
Includes JumpStarter, battery clamps, 3-in1 USB cable and user instructions
Hardshell, water-resistant case
Start current: 200A, peak current: 360A
Measures 133mm x 66mm x 16.49mm
Output: 5V/1A - 5V/2.1A
Input: 5V/1A

Power supply for all USB devices
Up to 20 jumps start in one charge
LED flashlight function with 3 modes
Compact & powerful lithium booster rated at 200A (400A peak current)
Very safe: smart cable with spark-proof connection and reverse polarity protection

Smaller, lighter and more powerful than ist predessor
Diagnoses, recovers, chargers, checks and maintains batteries safely for months
Advanced, fully automatic battery charger and maintainer for all 12V lead-acid batteries from 2,5 to 50A hours capacity.
Recommended for sealed and conventional batteries for motorcycles and similar vehicles, including dry-charged MF, sealed wet maintenance- free types, AGM and sealed deep-cycle gel batteries
Features vent-free enclosure, SAE weatherproof connectors and includes wall mounts
Unique diagnostic function automatically identifies deeply discharged (sulphated) batteries and applies a controlled high voltage with small fixed current for a limited period to recover them
Includes two detachable, interchangeable battery connectors: a connector with eyelets for permanent connection and battery clips for bench charging
Meets all relevant EN and IEC norms and CE directives
Comes with global input (100-240V)
CE conformity
EU plug

4-step 12V/12.8V 0.6A Battery charger-maintainer
OptiMate 1 delivers precise micro processor controlled charging and long term maintenance.
Ideal for vehicles that are seldom or seasonally used, or in storage.
The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges.
Indoor (lowest temperature: minus 4°F / minus 20°C).
Low Volt Start of 4V
Ideal for STD, AGM & GEL 12V batteries from 2 – 30Ah & Lithium (LiFePO4) 12.8/13.2V batteries
Input global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
Dust proof plug-in case, with 12ft / 370cm charge lead ending in SAE connector.
Totally safe for vehicle electronics.
Sparks suppressed.
Safe for long-term battery maintenance.
Automatic shut-down if short-circuited or battery disconnected.
3-year limited replacement warranty.
Weatherproof battery lead & battery clip set included.

Premium quick connect permanent battery lead for your battery
Rubber sealing cap & shroud for OptiMATE heavy duty SAE connector
40°C/-40°F very low temperature use; cable remains flexible at ‘below freezing’ temperatures.
Industry standard 2-pole SAE connector
Cable max. rating: 5 Amp
1/4" / M6 ringlets
15A fuse

USB double charging socket
Maximum power output of 2,100 mA per connection
Connection via cigarette lighter or vehicle electrical outlet
Angled connector housing
For 12 V Car operating voltage
Included in delivery
1 x USB double charging socket with universal plug


EMA.00.107.12200

Show Chrome cigarette lighter kits can light your smoke or power up your accessories! Power your devices while cruising and you'll never be stranded without a connection. You'll never be out of touch with Show Chrome cigarette lighter kits onboard.

This Dual USB Auxiliary Cigarette Element is designed to plug into a 12 volt cigarette lighter socket and allow charging of electronic devices via USB connections. This Auxiliary Cigarette Element has 2- USB plugs, providing a 2.1 Amp power supply with an LED indicator when properly connected. Compatible with iPads, iPhones, GPS and other devices.



DUAL USB CIGARETTE ELEMENT, USB 2.1 Amp Power Supply, LED on Indicator, iPad, iPod,, iPhone, GPS, PDA Compatible,

Cigarette Charger (Micro USB Type) for use with all Sena products and other equipment that have a Micro USB socket.

Weatherproof USB charger/socket for the ThunderBox advanced power distribution module (part no.: TB-USB1).
You may connect multiple USB chargers to one TB unit.

Aftermarket running lights? Heated grips? GPS? Phone charger? An extra gauge or gadget? We have the solution for you!
Connecting electric add-ons has never been this easy before.
Highlights
Lightning fast connectivity
Connect auxiliary equipment fast, convenient and safe to the tool-free terminal blocks supplied. Just plug in the wires and you’re set!
Two versions
Available in two versions: 16A (TB-U01) and 2x16A ( TB-U02)
Advanced tech
Multiple working modes (automatic and ignition key controlled). Constant electronic protection (over current, short circuit). Fuseless design.